|
Product Qualification RH
|
|
1
|
931
|
August 21, 2023
|
|
RH for Product Qual
|
|
2
|
741
|
August 17, 2023
|
|
About the ANSI/ESD S541 standard and sample test condition in ANSI/ESD STM11.13
|
|
3
|
2582
|
August 8, 2023
|
|
S20.20 and IEC61340-5-1
|
|
2
|
1345
|
July 31, 2023
|
|
Worksurface Requirement
|
|
1
|
816
|
July 28, 2023
|
|
ESD Monitor for Hearing Impaired
|
|
4
|
689
|
July 27, 2023
|
|
ESD failures detection
|
|
6
|
2131
|
July 27, 2023
|
|
S20.20 - 8.2 Personnel Grounding
|
|
5
|
3247
|
July 18, 2023
|
|
ESD measurement on ESD Shoes
|
|
4
|
4606
|
July 10, 2023
|
|
ANSI S20.20 Re-Certification
|
|
4
|
854
|
June 20, 2023
|
|
Calibration Inquiry
|
|
2
|
716
|
June 20, 2023
|
|
What is the specific meaning of equipment grounding conductor in S6.1
|
|
3
|
1099
|
June 16, 2023
|
|
Reference for Product Qualification
|
|
2
|
640
|
June 16, 2023
|
|
How should the frequency of compliance verification testing for ESD control projects be evaluated?
|
|
3
|
1079
|
June 6, 2023
|
|
Becoming certified for in-house ESD trainings
|
|
3
|
1256
|
June 5, 2023
|
|
Table 2, Footnote 6 states: “A periodic body voltage generation test should be done to verify the voltage is less than 100 volts.” Does Product Qualification of the Footwear/Flooring System need to be done on a periodical basis?
|
|
2
|
742
|
May 31, 2023
|
|
What information should be included within the organization’s product qualification records?
|
|
1
|
504
|
May 26, 2023
|
|
Does an organization need to write a tailoring statement if they do not use an ESD Control Item found in Table 3 of ANSI/ESD S20.20-2021?
|
|
1
|
549
|
May 26, 2023
|
|
To meet the requirement of “The Program shall document the lowest level(s) of device ESD sensitivity that can be handled.” in Section 6.1 of ANSI/ESD S20.20-2021, can the client report the most sensitive ESDS item they handle?
|
|
1
|
564
|
May 26, 2023
|
|
Does a facility need a tailoring statement relating to Product Qualification Environmental Conditioning if product qualification can be done at the facility’s lowest relative humidity?
|
|
1
|
515
|
May 26, 2023
|
|
: Can a client limit the scope of ANSI/ESD S20.20-2021 Facility Certification
|
|
1
|
537
|
May 26, 2023
|
|
If ESDS items are put in ESD protective boxes without the lid on the top, can we say it meets ANSI/ESD S20.20-2021 requirements?
|
|
1
|
550
|
May 26, 2023
|
|
Section 8.3 of ANSI/ESD S20.20-2021 indicates that “Handling of ESDS items, parts, assemblies and equipment without ESD protective covering or packaging shall be performed while in an EPA.”
|
|
1
|
1437
|
May 26, 2023
|
|
Do clients who use mobile equipment for the purpose of transportation but not as a working surface need to comply with Table 3 for mobile equipment?
|
|
1
|
582
|
May 26, 2023
|
|
ESDS items on shelves or mobile equipment
|
|
1
|
547
|
May 26, 2023
|
|
What ESDA training / education courses or certifications are available for developing competent ESD Control Program auditors?
|
|
1
|
720
|
May 26, 2023
|
|
Table 2, Footnote 7 states: “The required limit of < 1.0 x 109 ohm is the "maximum" allowed value
|
|
1
|
640
|
May 26, 2023
|
|
Does the client need to comply with ANSI/ESD S20.20-2021 Section 8.4.1 – “United States Department of Defense (DoD) Packaging Requirements” if it is a sub-tier supplier to the DoD?
|
|
1
|
580
|
May 26, 2023
|
|
Garment: ESD Coat vs ESD T-shirt
|
|
4
|
979
|
May 18, 2023
|
|
Vendor Qualification Requirements per S20.20-2021
|
|
5
|
962
|
May 18, 2023
|